Demetech N95 Cup Respirator

Demetech N95 cup respirator user instructions

1. Cup the respirator in your hand, with the nosepiece at your fingertips, allowing the headbands to hang freely below your hand.

2. Position the respirator under your chin with the nosepiece up. Pull the top strap over your head resting it high at the top back of your head. Pull the bottom strap over your head and position it around the neck below the ears.

3. Place your fingertips from both hands at the top of the metal nosepiece. Using two hands, mold the nose area to the shape of your nose by pushing inward while moving your fingertips down both sides of the nosepiece.

4. Perform a User Seal Check prior to each wearing. To check the respirator to face seal, place both hands completely over the respirator and exhale. Be careful not to disturb the position of the respirator. If air leaks around the nose, readjust the nosepiece as described in step 3. If air leaks at the respirator edges, work the straps back along the sides of your head.

REMOVE YOUR MASK

See step 2 of Fitting Instructions and cup respirator in hand to maintain position on the face. Pull the bottom strap overhead. Still holding respirator in position, pull the top strap overhead and remove the respirator.

VISIT PRODUCT PAGE